Verify problem with Win XP Pro

[appman1]

I just installed XP Pro as an upgrade and the verify function will not even come up. Has anyone else here encountered this problem?

 

Thanks, Mark [email protected]

[cadcam]

I have XP pro and do not fine thid a problem.

But I do have to ask,are you saying you did a upgrade or a freash install of the XP?

 

And if you did do a actull upgrade ,from what to XP?

[cadcam]

Mark do you know John Nelson over at apps at Haas main office out here in Ca.

I was talking with him just today. or should i say emailing.

[Mark H]

Now that you upgraded to XP, make sure you get the latest video card drivers from the video card manufacturer. That is most likely the problem.

[appman1]

cadcam, I have probably talked to John at Haas Oxnard and I think he is working on a special demo for one of our customers. Just a little personal history, I have worked for the HFO here in Cleveland since Jan 98 and started using Mastercam with Level 7. I did not do a clean install of XP but I finally got it working well enough to try to do some work and I couldn't use verify at all. I thought I would try here first for a quick answer. Upgrade was from 98SE. Since the original upgrade I deleted the 98SE partition and reloaded XP upgrade with ok results so far.

 

Mark

[cadcam]

Ok, if you have any more truoble feel free to write here or contact me.

 

Thanks jay