POST

[CNC442]

HI

I JUST LOADED IN X2 FROM MASTERCAM NINE. HOW DO I GET MY OLD POST FROM LATH 9 INTO X2.

 

THANK YOU

[Guest]

Read the transition guide.

[Cuda84]

C-hook updatepost.DLL

[Hardmill]

quote:

---

Read the transition guide.

---

The preferred method, no shortcuts

 

 

PEACE

[Roger Peterson]

updatepost.dll is the chook that will update your posts but you really should run through the transition guide, there is a lot of useful information in there that make the "transition" much, much smoother.

 

 

HTH

[Troy Gossett Indepak Inc.]

I would suggest changing copying old post and changing the name to something like latheX2.pst,

updatepost.dll will update and save the post with the old name, so if you think you will still use the old V9 post it will be easier to tell them apart.

 

+1 Transition Guide

 

Also check out the Multimedia section on the Mastercam website.