verify bug?

[3R!< W3NG3R]

Has anyone else seen something like this?

 

I verified a surface rough pocket toolpath using a solid as stock. The verify showed a gouge no matter what peramiters I changed. Also, when I changed the quality setting, the gouge got bigger with less quality. Now for the wierd part. I checked it in backplot and saw that it shouldn't gouge, so I ran the part with no gouge to be found.

 

Any ideas?

[Lee.]

How did you set your stock limits?

[3R!< W3NG3R]

stock was set to all solids.

[Ying Jiang]

Yep, that's one of the issues that was reported to CNC Software.

[3R!< W3NG3R]

Good to hear from you Ying. How is everything?

 

hopefully they fix it for the first service patch.

[Ying Jiang]

Things are good, busy but good. How are you Eric?

 

CNC Software is working on improving verify, let's wait to hear the good news.

[3R!< W3NG3R]

good. We are busy as well. had a great year.

[3R!< W3NG3R]

does anyone else have the verify modle freeze up when using a solid as stock?

I also use the fast forward button instead of play.

It freezes about 60% of the time at least. Its annoying because I cannot check the back side for gouges.

[Guest]

quote:

---

does anyone else have the verify modle freeze up when using a solid as stock?

---

I do not and I use solids for most of my verifies.

[laser]

I have a simular problem. Things have been working great, when I updated my MasterCAm 9.1 post to MasterCAM X, Then my CNC machine supplier sent me a new post, now when I verify things look wrong. If I verify single contours it works great but if I verify multiple it won't show paths correctly. The posts turn out correctly when cut.