Hi Jim, We have the same problem on customer's computer. It doesn't happen when I plug in my dealer HASP but we do get the error when using customer's HASP. Hope the MR will fix this error.

In Canada, both metric & imperial systems are commonly used. Why worry about translate "color" to "colour" when we have "KM" signs on the road but talk about "square footage" for shop size? I'm not saying, I'm just saying, you know what I'm saying?

RacerEX, I've fwd your request to our BC team. They are looking into it for you.

I've set my defaults to "Best". Never the less, the vertical "Surface Quality" slider works for me. I just tried all three options, and they all "stick" even after restart X4.

Have to have it:) Thanks Gunther!

Maybe try get the mtb file from a working seat of your version of Mastercam?

PFE32 editor and many other text editors (include CIMCO Edit) comes in Mastercam installation: Settings --> Configuration --> Start / Exit -- > Editor. You would use Mastercam interface (under Settings) to edit .control & .mmd files and use one of the text editors to edit the pst file. If you have a .pst and .psb file, you can only edit the .pst file. It's a good idea to make backups before editing.

You can also try our mpmaster post (form HMC & VMC) http://www.emastercam.com/posts/mpmaster/index.html

The issue that you are having is that Z value needs to be I value but only for drilling cycles. Here is one way of doing it: 1. Define address I: stri "I" 2. Assign zabs/zinc from "Z" to "I" in pdrlcommonb: quote: result = nwadrs(stri,zabs) result = nwadrs(stri,zinc) Now, your pfzout in drill cycles would output Z values as I. Hope this helps, Ying.

Great tool! Thanks as always!

Just added a bitmap (very simple one), tooltip & a .ft file for DrillPt.dll c-hook for a customer so that it can be added to X2MR2 toolbar. Here it is in case you would like to use it as well: ftp://mastercam:[email protected]/Ma...illpt_x2mr2.zip

Ok, I've copied the files to a temp ftp folder, you can get them from here: ftp://ftp.inhousesolutions.com/pub/Master...IE_geometry.zip ftp://ftp.inhousesolutions.com/pub/Master...TOOLPATH_X2.zip

Just tested, they work fine: http://www.emastercam.com/files/x2/4-5axis...IE_geometry.zip http://www.emastercam.com/files/x2/4-5axis...LPATH%20_X2.zip

Well said, Eric! CNC Software got our feedback in the meetings last week and said they will do something about it. Cannot tell you more than that...

xxxxor doesn't use standard RS-232 cable pin out. Check with your manual or dealer for details.