4th axis for vf3 hass

[ROB]

where can i get a post for a 4th axis to use on a

vf3 hass i need to run a contour using c/comp on a 3.0in pipe

to contour only a portion of it,

i do not want to use a surface.

[Finecut]

The Haas post is a 4 axis post.

 

Finecut

[cadcam]

Hi Rob ,It was nice talking with you.

Please give the post out that is on the FTP.

 

Please let me know how it goes.

[cadcam]

Fincut, He tried that one but did not like the output.

 

I am waiting to see what he wants as a output.

[ROB]

I HAVE AN EXAMPLE OF WHAT I WANT TO DO IS ON THE FTP MC8 FILES THE NAME IS PIPE COUNTOUR,WHAT I WANT TO DO IS RUN A COUNTOUR PASS AROUND THE EDGE OF THE RED SURFACE USING A 4TH AXIS ON A VF3 HASS

I DON'T HAVE MUCH EXPERIENCE MILLING WITH 4TH AXIS .ANY HELP WILL BE APRECIATED THENKS.

SORRY JAY I COULDN/T GET BACK TO YOU RIGHT AWAY

BUT I HAVE BEEN REALLY BUSY SINCE I AM THE ONLY PROGRAMER HERE THE ONLY CHANCE I HAVE TO GET ON THE WEB IS AT MY LUNCH TIME.

BTW- ARE YOU HERE LOCALY OHH!!! GOTTO GO

CHARLES DAVIS IS HERE I THINK HE IS GOING TO UPGRADE OUR MASTERCAM TO V9.

THANKS AGAIN.

[cadcam]

Hi Rob,

I am a few hours away from you.

I will be coming out there soon.

[ROB]

HI JAY!!!

WE JUST GOT V9 INSTALLED UP AND RUNNING

I GOT WITH CHARLES DAVIS REALLY SHARP GUY!

HE SHOW ME HOW TO DO WANT I WANT ON THIS PROJECT

I HAVE NOT RUN IT YET IT IS SOMETHING THA WE ARE GOING TO RUN EVENTUALLY BUT IT LOOKS LIKE IT IS GOING TO WORK ,ANYWAY THANKS FOR THE POST.

KEEP IN TOUCH.

[cadcam]

quote:

---

I GOT WITH CHARLES DAVIS REALLY SHARP GUY!

---

You bet he is.

Did he give you another Haas 4th axis post that suits your needs?

 

Let me know how you like the features in V9.

 

quote:

---

THANKS FOR THE POST.

KEEP IN TOUCH.

---

Any time ,and you bet I will.