Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
there are 2 disks for sw 1 for 32bit one for 64bit and i installed the one for the 64bit,
because this is a 64bit operating system
i have another computer that runs 32bit and didnot have problem at all, is there a fixing or should i just forget at all? just wondering.
thanks
has anybody installed mastercam direct on a 64bit system on solidworks 2009 sp3,i cannot figure out why is not working, is there a patch for it? I try reinstalling it, rebooting etc...
any input will be apreciated.
Thanks
xp64bit
mx3,8gig ram
i did a search and found nothing about outputing
c/c on 5ax toolpath
i'm trying to cut an angle wall on a 5ax haas trunion
and need to use regrind 1/2 em's
so i need to use c/comp on the toolpath
so far i have not ben able to do it,
i can selected on the parameters but i wont output c/com when i post it
i try 5ax curve and 5ax swarf.
if any body have any input i will apreciated
i put a file on the ftp MCX2_Files/5axwall.mcx
if any body want to look at it thanks
x2mr2 sp1
windows xp 2gig ram
i'm trying to force g8 for -milling only- on a fadal format1 and cancel g9 for drilling on every op.
i did a search on and found some code but,
i have no idea where it goes, using mpfadalmaster, any input will be apreciated.
here is the code.
pg8g9 #Add either G8 To Milling or G9 to drilling SLA
If opcode = 3 , "G9"
if opcode < > 3, "G8"
xppro dell
x2mr2sp1
mill3, lathe2
danbo.
i'm running mcx2 mill3 lathe2 combo.
btw if i select right side plane anc c axis
it will cut at the front, need to cut at the od closer to the chuck.
crazy.
yes i read it and follow everything but says nothing about 3d surfaces w/no y axis.
try projecting also.
dont know if there is a simple way to roll/unroll
surfaces when you dont have a true dia.
id don't have acces to the ftp but,
if you or any body will like to take a look at the part i can email.
thanks for the responses.
it uses G7.1 but i canot make it to work on
mastercam i try differernt paths and nothing worked, cutter paths go sideways not in the right place.
try different toolplanes and, nada!
is it possible to mill od surface on lathe
no y axis?
surface has 2 angles back of part closer to the chuck.
did seach and found nothing.
any input will be apreciated.
this is for a puma300 caxis 21i control.
i don't have acces to the ftp site.
mill3 lathe1 combined.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.