help with drill cycle

[Rick Henrickson 65]

How do you get the post to write a drill cycle long hand

I want the first peck at .726 deep

then subsequent pecks at .161

[beej]

edit your post. there is a question whether to enable canned cycle or not.

 

search for this:

Enable Canned Drill Cycle Switches

[heeler]

I think that in X2, you can also do it by unchecking the drill cycles in Control definition/Machine Cycles/Mill Drill Cycles.

 

HTH

 

Glenn

[Rick Henrickson 65]

thanks guys the post question didnt work

I will look in the control def

the def didnt work either it does this

 

N1 T1 M06 (31/64 COBALT DRILL)

G00 G17 G0 X0. Y0. S567 M03

G43 Z1. H1 D1

M08

Z.1

G94 G01 Z-2.5 F.01

G00 Z.1

Z1.

M05

M09

G00 G91 G28 Z0.

G90 G28 Y0.

[Guest]

Rick,

 

If your control doesn't support susequent peck you'll likely have to do this with a custom drill cycle.

[Rick Henrickson 65]

thats cool, thanks for the help

I just thought it might be something easy.

just a special situation

[heeler]

This is what I get when I have the boxes checked in the control def.

 

N140G0G90G54X0.Y0.S534M3

N150G43H1Z.1M8

N160G99G83Z-2.5R.1Q.826F4.28

N170G80

N180M5

 

And unchecked produces this

 

N120T1M6( 1/2 DRILL TOOL - 1 DIA. OFF. - 51 LEN. - 1 DIA. - .5)

N130G05.1Q1

N140G0G90G54X0.Y0.S534M3

N150G43H1Z.1M8

N160G1Z-.726F4.28

N170G0Z.1

N180Z-.626

N190G1Z-.887

N200G0Z.1

N210Z-.787

N220G1Z-1.048

N230G0Z.1

N240Z-.948

N250G1Z-1.209

N260G0Z.1

N270Z-1.109

N280G1Z-1.37

N290G0Z.1

N300Z-1.27

N310G1Z-1.531

N320G0Z.1

N330Z-1.431

N340G1Z-1.692

N350G0Z.1

N360Z-1.592

N370G1Z-1.853

N380G0Z.1

N390Z-1.753

N400G1Z-2.014

N410G0Z.1

N420Z-1.914

N430G1Z-2.175

N440G0Z.1

N450Z-2.075

N460G1Z-2.336

N470G0Z.1

N480Z-2.236

N490G1Z-2.5

N500G0Z.1

N510M5

 

Which is what I understand you to want.

 

HTH

 

Glenn

[Rick Henrickson 65]

my post must not support that then

[htm01]

talk to your re-seller, Steve at S4A just did a Haas post for me with IJK custom drill cycle that does just that.

 

or here's an old topic

http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=007125

[Bryan Johnson]

for X2, the control def should take care of this (any post).

 

for older version change the following in the PST file.

 

usecanpeck$ : no$ #CD_VAR Use canned cycle for Peck