Geometric Dimensioning & Tolerancing C-Hook

[Allan Brown]

Verisurf has created a free C-Hook utility for GD&T.

 

Browse to this page for the 411:

 

http://www.emastercam.com/tools/chooks/gdt/index.html

[Scott Bond]

Thanks Dave

I will use it .

[Michael Reynolds]

I've been looking for something like that! One thing though, I downloaded it and tried it. A problem I'm having is that the feature control frames come in disporportionate to the text size, and way too long. Am I doin' something wrong?

 

Thanks!

 

Mike R.

[Verisurf - Ernie Husted]

Mike,

 

What operating system are you using?

Did you reboot? maybe the font did not register.

 

Is that V8 or V9 that you are trying?

 

Ernie

[cadcam]

Hi Ernie, Does the C-hook work with V9 or just 8.1.1?

 

thank you for your time.

[Verisurf - Ernie Husted]

It works with both, but you will need to install the right one.

 

Ernie

[cadcam]

Hi Ernie , thank you for the reply I will down load them and give them a try.

 

I will see you at Westec. What was the booth # again.

 

Boy do I feel dumb. I should of looked before asking my thought.

I see there are links for both.

 

[ 03-06-2002, 11:50 PM: Message edited by: cadcam ]

[Verisurf - Ernie Husted]

Go to www.verisurf.com for Westec info.

 

Ernie

[Michael Reynolds]

Hi Ernie!

 

I'm using w98se, running 8.1.1.

 

The text size seems to be ok, but

the boxes their in are way too long,

and the text & symbols go above them.

 

Thanks for your help!!!

 

Mike R.

[Verisurf - Ernie Husted]

Mike,

 

It looks like you might have the wrong font, go to your windows font directory and find the GDT font, and then delete it.

After you have deleted it, then open the mcam9 folder and find the new GDT font there, Copy it to the Windows font folder.

 

Now try it.

 

Good luck

 

Ernie