posting work offsets in transfer

[JDowe]

Using MPfan in X2 when using the toolpath

transform in mill I set work offset numbering

to assign new and start 0 and increment

1 but all offsets are coming out G54

where in the post is the setting to get

this to increment

 

Thanks for any help

[Rick Henrickson 65]

try starting at 1 and increment of 1

[Jim Evans from CNC Software]

Offsets are only applied to unique planes or views (Views/planes are changes in toolplane or tool origin).

 

Using Toopath transform, you must be using the toolplane method and not coordinate. Cooridinate method will NOT product offsets.

 

Also if you are in the same plane, say top, but have multiple part locations along a sheet of plywood for example, then you need to toggle on the toolplane orin only option to get new offsets at every new tool origin created in the transform.

[JDowe]

Thanks Jim - it was tool plane origin only