v9 problem

[ROB]

REPEAT ROTATE A CONTOUR TOOLPATH 4 PLACES FROM ORIGIN CLIMBING G03 USING C/COMP RESULT:1ST,2ND,3RD CONTOUR FINE

#4 CONTOUR GOES TO G02 S0 C/COMP IS REVERSE WHY?

I'M POSTING THIS IN MPFAN I GET THE SAME RESULT OVER AND OVER I TRY RECHAINING AND NOTIHING

SAME RESULT IS IT A BUG AR WHAT?

HOW CAN I OPEN AN MC9 ON V8 IS THIS POSIBLE?

 

ANY HELP WILL BE APRECIATED THANKS?

[cadcam]

Well to start, I would like to see the file.

 

Now as for the other thoght of bringing in the MC9 file back to V8 .

 

File Covert save as MC8.

[ROB]

THE FILE IS ON THE FTP SITE MC9 FILES AND THE NAME OF THE FILE IS ROTATE,

 

AND THANKS FOR THE RESPONSE.

I DID THE SAME THING IN V8 AND WORKED FINE.

ONE MORE THING CAN SOME BODY TELL ME HOW TO

MODIFY MY POST SO WHEN I ROTATE MY TOOLPATH

OPERATION DOESN'T ROTATE WITH THE NOTES ON THE PARAMETTERS SETTINGS WHEN I POST IT ON MPFAN

THANKS ONCE AGAIN.

[cadcam]

Ok Rob sends it to CNC.

There is defiantly something wrong.

 

If you put the last one to 275. Deg then it changes back to G03. I tried this just rotating just that hole that was giving the problem in increments of 1 Deg at a time...