Preview when creating draft surface.

[?Mark]

Create any arc, go to create draft surface, type lenght and angle, then when using dynamic spin all is good, but clicking on any side view screws up the preview big time.

Clicking ok creates good surface though, so wondering if side or front views are not supported when previewing this?

[Guest]

Are you sure you didn't hit the plane button by accident Mark,

 

I just did

[?Mark]

I hit plane on purpose...and it flattens it right out...

Type you do fast...

[Guest]

Other than my eronious(sp) keystroke, unless I am not doing the same thing it seems to be OK here

[?Mark]

Edit first post.

Hitting any side/front plane when previewing and then hitting o'k creates a bad surface

[Qmp]

Go into settings > config > Cad settings > uncheck "update Cplane and Tplane when changing Gview"

 

Qmp

[Pete Rimkus from CNC Software Inc.]

what he said...

 

Since Draft surfaces are built in the Z-direction of the Construction plane, doing anything that would change your C-Plane will change the surface.

[?Mark]

That takes care of it, thanks guys.