Tools disappearing

[mwc815]

Hi, I'm running X2 SP1 and I'm having trouble with the tool list in the op manager.The part is programmed and the file was closed and opened again.4 of the tools were gone from the list and 4 others were in there twice (T3,T3,T4,T4).Any Ideas?

 

Mike

[bogusmill]

I'm having trouble too. In my case I create a tool for a job then hit save to library. The save window comes up and points to the correct file and folder on a network drive and I hit the save button. It seems to function corectly.

 

Then when I go to get that tool for another job, or go to the tool library throuhg ToolpathsTool library that tool is not there. I can get it there by selecting the tool in the part window then hitting the down arrow copying it to the library window. Why is the save to library faulty?

[mwc815]

This did happen after I saved a tool from the op manager to the library.

[rdshear]

I was having the duplicate tool issues prior to SP1. I don't know what exactly triggered it. I'm hoping when MR1 comes out... "when it's ready" most of the lower priority bugs will be cleared up. At least they got several with SP1

 

Rick

[jmm0422]

This is a registered bug with CNC. It mostly happens from what I can tell when you are using your own tool library.

 

Mine was losing tools changing tool and duplicating. I registered it as a bug thru my local reseller.

 

Jason

 

I am running X2.