titanium machining

[simonpeter]

Hi guyz

 

Anybody know cutting speed & feed used for titanium machining..

[BernieT]

Search the 'off topic' pages, this has been discussed.

[Storkman]

what grade?

[Guest]

I'd figure you for about 5th grade

 

[Storkman]

I have my 6th grade diploma hanging right here on the wall, Thank you.

[Guest]

quote:

---

I have my 6th grade diploma hanging right here on the wall, Thank you.

---

 

Titaniums in the 6al-v grades can generally be cut in the 95 - 125 SFM range. You'll want to make sure you are using carbide and that you have a Class D fire extinguisher close by, just in case.

 

But like Terry asked knowing what grade can make a difference

[Chao]

uncoated carbide insert, grade H13A