Video Card troubles

[Reg]

Running a P4 Titan Series GA-8IDX MOTHER BOARD

VIDEO CARD IS NVIDIA GeForce2MX/MX400 64megs

When I go to verify the part the graphics are all screwed up, also the lines that should be certain colours when I draw the part are not right.. any suggestions would be appreciated.. email me at [email protected] thanks for taking the time to read this Reg

[JAMMAN]

Which OS? If it's win98 mor than likely it's the MX.

[BernieT]

This thread really covers it well.

 

http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=001730

 

BerTau

[JAMMAN]

And many other threads if I remember correctly!!

[Guest CNC Apps Guy 1]

There is a plethora of topics about Video Card issues. CLick on the search and type in "Video Card" and you'll return probably 10 or 15 topics.

[Bullines]

Once again folks...

 

For those who have taken the SATs or a similar test, this should make sense. And for those who haven't, this should still make sense.

 

Q> MX is to nVidia GeForce, as:

 

(a) Diet Coke is to Coke

( Non-alcoholic beer (near beer) is to regular beer

© Windows 9x is to Windows NT/2000/XP

(d) Intel Celeron is to Intel Pentium III/IV

(e) Mill Entry is to Mastercam Mill

(f) All of the above

 

Pssst, choose "All of the above" if you want to pass.