O/T Need some help

[jmm0422]

I have a YCM 102a vertical machining center. I need to put a 5 tilt rotary tables up there. What we bought was a Yuasa DMTRT220. It is just to darn big. With that up on the table and a standard 6" vise I only have about 4" from face of tool holder to top of hard jaw. That does me no good.

 

I need to find a low profile 5 tilt rotary tables to put up on my table. Does anyone have anything like this that is not a full blown 5 axis machine?

 

 

DMTRT 320

 

NSV 102A

 

Jason

[Kyle Waters]

Jason,

Just to be sure I understand, you want a 3+2 type table or you want 5 indexers on 1 tilting axis?

[Colin Gilchrist]

Haas makes a two axis trunion table that is only 11.88" from the base to the top of the rotary. Look at the TR210 model. Do you want to have full 5 axis capabilities? Or are you just doing positioning?

[jmm0422]

Kyle if I understand what you are saying I want the A axis positioning and the C axis full contouring.

 

Colin we looked into the Haas but they will not put a Fanuc motor in for the 5 axis contouring.