Right click in OP manager

[John13]

Has anybody else seen this? Every now and then if I right click in the op. manager to edit, the verify window pops up and it's ready to verify. It's been doing this for a while, but not all the time. Sometimes it will do it 2 or 3 times in a row, sometimes just 1 time. Just curious if anybody has experienced the same thing.

[Guest]

Put the crack down Keebler.

 

[SLJ]

Yep, I seem to get verify more often than the pick list that is supposed to come up. Cancel out and all my operations that were picked are now "unpicked"

[J Coulston]

If you click LMB on "Toolpath - 9.2K" backplot opens, if you RMB on "Toolpath - 9.2" verify opens.

 

RMB anywhere on the line seems to open Verify where as backplot needs to be click on the Toolpath - 9.2.

[DavidB]

It's because of where your mouse is placed in the ops manager when you right mouse click. If it's hovering over the toolpath area below the geom for that toolpath and you right mouse click it will go straight to Verify if you left mouse click it opens Backplot.

 

It's always been like this for backplot.

 

It's just another way to get to backplot or verify.

Saves haveing to move the mouse all the way up to the top of the ops manager to verify or backplot.

 

Move the mouse more to the left of the ops manager and you'll get the options your after.

 

HTH

[Mater]

I've seen this before. Try to be sure your cursor is NOT beside the Toolpath x.xK line. Go above or below it, that's what works for me.