Question on changing hole size on multiples

[mandolinkgn]

We have a waterjet that the software really has issues with offsetting a distance when we try to control size. I know you can filter and select all arcs of a certain diameter, but can you change their sizes all at the same time? If so how do you do it? The department that is running the waterjet is using McamX2 to manipulate the geometry then saving as a .dxf file so then they can run the waterjet software. They want to take a large part with multiple holes and change their diameters all at once.

Thanks,KGN

[Guest]

There is a c-hook on the FTP multi-arcs that I believe will do what you are asking

 

hth

[doyleg]

cool, i've been wandering about the same for years.

 

 

x2mr1 mill level 1

solids

[Roger Martin from CNC Software]

mandolinkgn,

 

Arc MultiEdit (X2).Zip contains the add-on you're looking for.

(Just extract the files in the ZIP into your CHOOKS folder).

It is available on the forum FTP site in the /Mastercam_forum/X2_Add_Ons folder

[mandolinkgn]

Hey thanks so much!

KGN

[kkominiarek]

ARC MULTI EDIT.....that's what i needed