X2 MR1 SP1 Verify

[DavidB]

I verify a job that has differant tool planes but the same cutter.

Say a 10mm ball noes at A0 B90 then the next toolpath using the same tool at A180 B90.

 

The verify color changed, at first I thought I had the wrong tool programmed. It seems the verify now changes the color for each tool plane not just each tool. So I have one side verified green and the other side veried grey all with the same tool.

 

I thought verify changed color on tool change only?

 

 

Anyone else seeing this?

[DavidB]

Anyone else seeing a different color in Verify for each tool plane?

[MIL-TFP-41]

I have seen this since V9. i think mastercam verify looks at a change of toolplanes as a toolchange...Try checking "stop on Toolchange"...when changing planes verify stops even tho you are using the same tool

[DavidB]

I have seen verfy stop at different tool planes when stop at tool change is selected. Dont you think this is a bug?

 

The verify color should only change at a tool change and not because of a tool plane change.

[MIL-TFP-41]

quote:

---

Dont you think this is a bug?

---

yes