Multiple slices in solids X2 MR1

[Smit]

In Version 9 you could create a slice from a solid, change planes, create another slice, etc multiple times without picking the solid each time.

 

This functionality seems to be lost in X2. Every time I create a slice I have to repick the solid. Not a big deal, but it can consume some time on a complicated solid.

 

Anybody found a way around this?

[Qmp]

It worked fine here with X2MR1, Maybe you have more than one solid on screen.

 

Qmp

[LaszloK]

It does not work for me either. If hit apply once it will draw the slice but keep the apply box blue. If you hit apply again you stay in the slice function but need to select the solid again. If you do not hit apply the second time you can select another plane but when you hit apply for the second slice the first slice dissappears and the apply button is no longer active and the first slice is gone.

[jctjct]

I see the same thing as Laslok. If I need more than one slice I end up exiting the command and doing it again. If it is from a solid I can at least use the "last" selection, but still is a PITA.