Mastercam X

[Hao]

A question about the contour toolpath. If I want it to be a climb mill instead of conventional mill, where can I find the choice because I can't find it in the parameters tab.

Thanks in advance.

[Hardmill]

You choose direction by the way you chain your geometry.

 

 

PEACE

[Guest]

If you want to change afetr you've already chained, you can click on geometry in your OP manager >> right click on the chain and reverse it.

 

You will likely then need to change your cutter comp side, regen and you've changed direction

[Hao]

Okay Thank you.