X2 Lathe bug?

[calnet42]

When I use "Edit Common Parameters" and set "Max spindle speed" to 50, it changes the G50 "spindle clamp" to 50 rpm, but also, all CSS speeds above 50 are set to 50.

 

I do not remember this happening in previous X revs.

 

Has anyone else seen this?

 

Thanking you in advance,

[crazy^millman]

No I am not seeing this. Is the post and old V9 post that was updated to X then used in X2 or are you using a fresh version of an X2 post? I would try the standard MPLFAN post and see if you get the same results if you do then get on the horn with your dealer if you don't and do not understand how to modify your post then get on the horn with your dealer.

 

HTH

[calnet42]

The post is an x post modified from mplfan.

 

But, the problem is not happening during posting,

it appears on the toolpath parameters page in the spindle speed and max spindle speed fields.

 

if changed within the toolpath parameters page, the spindle speed is unaffected by a change in the max spindle speed.

 

but, when i change the max spindle speed "globally" from the edit selected operations window, the spindle speed will change.