Need to alter my post a bit, question

[DaveR]

My current Haas post, pretty much stock but professionally modded to use G10s, is not outputting a G90 at the start, causing issues. I need the start line (G90 et. al.)to be right at the beginning of the program before all of the G10 calls.

 

I do not have any experience modding posts besides flipping switches on and off (like the A axis) so I'm pretty much in the dark here.

 

Anyone know where such a line would go and how it should look?

 

Thanks for any help

 

Dave

[DavidB]

You could put "G90", e$ in the pheader section of the post.

 

HTH

[DaveR]

Thanks, that sounds like it will get me there.

 

Just curious why the " ,e$" ?

[MIL-TFP-41]

quote:

---

Just curious why the " ,e$"

---

think of e$ = end of block

[DavidB]

anything inside " " is forced the ,e$ is as stated above for end of block or line.

 

Having "G90" will force a G90 everytime.

 

HTH

[Guest]

Not "sure" how your "professional" guy did it but this is what I did in one of my posts

 

Linky

[DaveR]

Yours is a lot more sophisticated, very nice, thanks for posting it up for all to see. That's mighty nice of you. I may use it someday.

 

Thanks for your help, it worked perfect.

 

 

Dave