level set name

[Ashan]

I could not save the level set NAME

What I am missing to do that

[Kyle Waters]

Ashan,

What Version?

[Ashan]

X@mr2

[Ashan]

sory X2 MR2

[crazy^millman]

Works fine here you can save it as just about anything can be used in there now not just numbers.

[Christopher MacCoy- CNC Software]

Could you give us some more information? I tried it in X MR2 and it worked fine for me.

[Ashan]

Sorry I was busy

When I set the level and level name at the bottom left corner field it only take the name and level set comes empty

Now I double click at the level and set on that level set. It is works ok

All previous MC I use only as first step because that I had problem

I hope you understand what problem I had

[Christopher MacCoy- CNC Software]

I'm sorry your having the problem. I looked into it and it is a known problem. It will be fixed in a later version. I had it work after playing with it for a while in MR2 though. If you want to try to actually see that it can work, try my workaround.(then you can apply it to what you do later).

 

Workaround: File>New> click level manager> Create level 2> double click on the name field for number 1 (don't make 1 highlighted)> type NAME> Press enter> double click in Level set> type Name> press enter> Green check to get out.

I hope you could understand that. If you need more assistance or it wasn't clear e-mail me at [email protected]

[Christopher MacCoy- CNC Software]

Workaround is easier: Sorry, i played with it a second longer because I thought my workaround was a little ridiculous, I discovered it works fine if you just double click on the grid for Name, and double click on the grid for level set. Then press the green check, and your work is saved. Have a nice day!