axis machine

[fabriz]

hello everyone.our company owns a axis machine and it is having trouble reading nc code.we have been told by the the manufacturer that the problem is the nc code. it shows 5 decimal numbers in the x and y directions and suposedly it should have only 4 places. where in the post sould i look to change this setting? thanks for your help n advance.

[Kannon]

code:

---

 fs  2  0.4         #Decimal, absolute, 4 place 

---

yours prolly says..

 

code:

---

fs  2  0.5        

---

[fabriz]

# Format statements - n=nonmodal, l=leading, t=trailing, i=inc, d=delta

# --------------------------------------------------------------------------

#Default english/metric position format statements

fs2 1 0.7 0.6 #Decimal, absolute, 7 place, default for initialize (

fs2 2 0.5 0.3 #Decimal, absolute, 4/3 place

fs2 3 0.5 0.3d #Decimal, delta, 4/3 place

#Common format statements

fs2 4 1 0 1 0 #Integer, not leading

fs2 5 2 0 2 0l #Integer, force two leading

fs2 6 3 0 3 0l #Integer, force three leading

fs2 7 4 0 4 0l #Integer, force four leading

fs2 9 0.1 0.1 #Decimal, absolute, 1 place

fs2 10 0.2 0.2 #Decimal, absolute, 2 place

fs2 11 0.3 0.3 #Decimal, absolute, 3 place

fs2 12 0.4 0.4 #Decimal, absolute, 4 place

fs2 13 0.5 0.5 #Decimal, absolute, 5 place

fs2 14 0.3 0.3d #Decimal, delta, 3 place

fs2 15 0.2 0.1 #Decimal, absolute, 2/1 place

fs2 16 1 0 1 0n #Integer, forced output

[fabriz]

this is what i found in the post. which line are taking about? thanks

[Kannon]

code:

---

fs2 2 0.5 0.3 #Decimal, absolute, 4/3 place

---

Try..

code:

---

fs2 2 0.4 0.3 #Decimal, absolute, 4/3 place

---

and..

code:

---

fs2 3 0.5 0.3d #Decimal, delta, 4/3 place

---

to..

code:

---

fs2 3 0.4 0.3d #Decimal, delta, 4/3 place

---

I hope the post gurus will correct me if I am wrong

[fabriz]

i wil try that, thanks for your help

[Kannon]

hope it works!

[TonyNanni@BNB]

did it work. I want to go the other way. my WEDM post outputs 4 place and i want it to output 5

[fabriz]

it worked !!!!!!!!!!!!!!!!!!!

thanks again