G92 posting not G54

[RACINGCONVERTERS]

I am helping a friend program a fadal and everytime I start a new operation it is defaulting to G92 and not G54. In control definition it has a 2 in the misc.integer screen which is G54. Can anyone tell me what is happening?

 

Also he programs to the edge of the cutter and runs full diameter comp. Is there a way to do this in MC?

 

Thanks in advance

[Jim Evans from CNC Software]

Make sure the operations Misc values are set correctly and a value of 2 is in the Misc Int 1 in the operation. The control definition only sets the default values, but there are also settings to tell the system where to grab the defaults.

 

Check the operation to make sure.

[RACINGCONVERTERS]

Jim that is what is happening it is changing to G92 in the operation and I have to go back and change all my operations to G54.