Ok Defining Chucks corrupts Lathe Ops on Mill/Turn Part.

[crazy^millman]

This is the 1st time I have seen this. I am doing a part and using both spindles to do the work. I did not define my chuck since most time I never do since it doesn't display milled part is lathe right anyway. Well I am having problems getting it to pull up the right commands for the sub spindle so though ok been some months since I had to do this so maybe I need to. Well no dice since it corrupted my lathe operation and know tells me they are on the wrong planes???? Sorry, but what so back to not using chucks, but was wondering what others are seeing when they use the chuck and doing twin spindle work. I do remember it was buggy at best, but know going in the crappier is not any good.