set-up sheets

[fire4]

Hi All

We are have some decusion about different ways to do set-up sheets. This place has eight different people doing them eight different way.

Could I get some input or maybe you could

e-mail me some samples in word pad form at [email protected]

[herbert west]

I like to list what operation is being done,

what tools are involved ie: tool mfg and part # and insert mfg and part #. I also list a very important item in our shop: max tool depth. I type this up in castillo text editor along with a few notes about when to check what and where etc. I also include a drawing of the project mounted on the machine table showing vise and clamp locations etc. It all depends. Sometimes our guys are overwhelmed by too much "data" such as found on a certain cad/cam system's setup sheet

[mario]

I would like to have sample too if possible

thank you everybody

 

and HERBERT WEST I would like well if you could send me drawing of table showing vise and clamp

thank you

 

[ 05-10-2002, 09:54 AM: Message edited by: mario ]

[mario]

fire4 your email addrese not good

[herbert west]

Mario;

I'll send you something when I get back to work on monday.

 

What I did was draw a bunch of nuts, bolts, and clamps that our guys use around the shop. I save these in a folder called "hardware" and merge them into the geometry. Carr-Lane has a cd filled with this stuff that you can import into your system. Translate/transform/mirror etc. as needed.

 

For the machine table I looked at the specs in a Haas owner's manual. Did the same thing for our rotary table also.

 

Looks good, works good, and helps the operators get the concept of what I doing with their machines.

[cadcam]

And for a reaaly nice solid of a kurt vise look on the FTP.

This was done by Charles Davis.

Charles still waiting for the one with MC on the side instead of Kurt.

 

Link to were the Vise is.

 

[ 05-11-2002, 11:30 AM: Message edited by: cadcam ]

[mario]

ok herbert I waiting

thank's

[Todd Mann from Fastech]

OK. I messed up my email address

This is a good one [email protected] and I also messedup my emastercam user account and had to create a new one.

[email protected]

[herbert west]

Ok Mario. I emailed you a sample setup sheet and a couple of iges files. I hope they will help you.

 

Good luck!

[mario]

merci thank's