My post has the g61.1 in the mis. values and it hak k =?

What happens when you want to use high speed smoothing? (G5 P2)

Ok all you Mazak Variaxis guys! I need to help with the Dynamic Work Offsets! Do I want to use G54.2, G68.2 or G54.4?

Here is what I want! I want to create a tool library for a machine and asign a tool holder to it and when I bring that tool into my file I want the tool holder to aready be there. But I also want the flexablity to replace this tool and holder assembly with one from another machine tool library! I hope X7 comes with some big changes in this area!!!

I have changed your stepover to .05 and your min toolpath radius to .020 and your arc filter/ tolerance to 1:1 and it will regen in like 45 seconds. But when you change the step over back to .010 it take a lot longer!

When you save your part as an stl file make sure you are on wcs top. Also the Quality bottom and the speed will effect this.

Ok. I have a MCX file created as a Seed Part. I have one piont and about twenty some piont toolpaths in my opertions manager with my tools and my holders attached to my tools. I have my machine def. and everything all set up the way I want it. Now I have this old file that I want to make the tools and the hold holders match my seed part. I import all the toolpaths into this file with the tools but the holders don't come in with them. Can I have it bring the tools and the holders that are asigned to them in some how?

I do have it set and the tool library is good, but when I go to get a holder i have to pick the libray i want it doesn't have any way to lock a certian holder library to that Machine def?

Thanks I will give it a try.

How about the holder library?

I am trying to change where the Mastercam mill default tool library and holder library is located. When I open Mastercam and create a toolpath and I go to get a tool it is defaulted to C:\Users\Public\Documents\shared Mcamx6\mill\Tools. I want to change this to a network drive. Is the a place where I can change it in the Machine definition? Or is it under setting config?

Has anyone on here built a VF-6 Haas Machine for Vericut? If so did you get the Solid model from Haas or did you draw it your self?

I am using a horizontal machine.

I am using top front front and top back back

Yes I did change the correct post. I also change the force_index to yes$. It now post out M10 and M11 but it is before my fixture offset line so that is not going to work!!!!!