Easiest way to create this simple geometry

[savagkd]

Try creating a line at Z.1 that intersects your angled line. Then xform translate, copy, # of times, from the end of your line, to the intersection of the angle and the Z.1 line.

[neurosis]

Savage, that is exactly what I ended up doing in the end. I also just created a mock tool path using a 1/4" endmill with no cutter comp with the top line as stock top and bottom line as depth @45 deg, then used the plotter to create and save the geometry. Im sure that would work with any angle of line but seems like allot of work to go through.

[Dan@home]

Xform offset, # of lines and distance, on your rotated Cplane.

[Kyle Waters]

Neurosis,

If the angled line is based on the bottom(or top)across line, can't you just create a new c-plane using the two lines so that your z axis is perpendicular to the angled line, then xform translate .1 in Y? I am at home, so I hope that came out right...