Change base machine view in X2 MPmaster Mill Post

[Lars Christensen]

Is this possible to change in the post?

 

From the MPmaster post itself:

code:

---

 # vmc = 0 (horizontal machine) uses the front toolplane as the base machine

# view.

---

Well not to be trouble or anything but my zero has always been the "right" side, and I think I would like it to stay there.

 

Thanks

Lars

[Slick]

"Zero" or "plane"? Are you saying that the Right Side C/Tplane is your B0?

 

The vmc switch is only used to toggle between a horizontal machine type (Front plane is rotary "B" zero and you rotate about the front plane's Y axis, Right plane is B90, Back is B180, Left is B270) and a vertical machine with Top at A 0 and rotation about the X axis of the Top plane.

 

What is it you need to accomplish Lars?

[Lars Christensen]

I am trying to get "Right plane"=B0. "Back plane"=B90. "Left plane"=180. and "Front plane"=270.

 

My only reason is.............Thats they I always have had it