Op manager gone

[bogusmill]

The boss here has lost the op manager and none of us can figure out where it went or how to get it back. It's not on another screen or behind some window, Alt+o and View toggle op manager don't bring it back. How do we get it back?

[Michael Sullivan]

This happened to me once. I ended up replacing my config file to fix it.(I keep a backup handy)

 

Good luck

[robk]

Just guessing here.

Did you try View/ Toggle operation Manager? Maybe you have something else assigned to Alt-O?

Are you sure it's not dragged up/down/side of the monitor somewhere?

Try re-starting your PC?

[bogusmill]

Did you try View/ Toggle operation Manager?

 

Discussed in my first post, replaceing a config file was tried maybe wrong one. Whats the file name?

[Midwest]

mcamx.config

[Roger Martin from CNC Software]

Bogusmill,

 

Window (dialog) position data is not stored in a CONFIG file.

 

Try this...

 

In your Windows Control Panel, you'll find the

'Mastercam X' applet. Run it and on the dialog...

Make sure that the "Apply changes to this version" is set to the correct version you're trying to alter.

Then check the "Dialog position" option in the "Reset" groupbox.

Then click Apply and then OK to dismiss the dialog.

[Robert Critelli]

Try this :

 

Sorry I have not had my coffee