diamond machining ?

[Elmo Crow X]

anybody out there doing diamond machining?

what mill or lathe are you using?

i am supposed to start up a process for this and am looking for any help available.

thanks

[MultiAxGod]

Didn't know diamonds were machined?

[Darren Long SPE]

You mean PCD inserts?

 

Or Diamond Coated end mills?

[Dan@home]

Did alot of dia turnning with alum, on a Kia Turn. Finish was our (almost only) concern as long as the part screwed on. We had 6 Kia lathes, 2 32mm Citizens 1 twin spindle Daewoo and 2 small Vert mills thats all we did. We called it making jewelry. Didn't care for it much. Why?

[Kevangel]

http://www.mooretool.com/cusmach.html

 

Down to the middle of the page. Also another diamond machine over at the side of page..

[Moldmaker74]

http://www.precitech.com/

 

Another brand, I worked at a shop with 3 of these lathes.

[Elmo Crow X]

thanks for the machine info its a start.

[MultiAxGod]

Wow, had no idea that was being done. Neat!