Mplmaster Notes

[Post dept]

All,

 

The new install of mplmaster on this page has some additional programming notes.

 

They may be particularily helpful if you're using a sub spindle.

 

Brett

[crazy^millman]

Thanks Brett will take a look.

 

MPLMASTER LINK

[bigjohn]

Thank Brett.

I have a question.

Does this post work in MCX2? Or must it be updated to MCX2? The heading and few initial lines in the post refer to Version 10 and Mastercam X.

 

code:

---

[post_VERSION] #DO NOT MOVE OR ALTER THIS LINE# V10.00 E1 P4 T1119899076 M10.00 I0

# Post Name : MPLMASTER

# Product : LATHE

# Machine Name : GENERIC FANUC

# Control Name : GENERIC FANUC

# Description : GENERIC FANUC LATHE C-AXIS POST

# Mill/Turn : YES

# 4-axis/Axis subs. : YES

# 5-axis : NO

# Subprograms : YES

# Canned Cycles : YES

# Executable : MP 10.0

#

# WARNING: THIS POST IS GENERIC AND IS INTENDED FOR MODIFICATION TO

# THE MACHINE TOOL REQUIREMENTS AND PERSONAL PREFERENCE.

#

# Associated File List$

#

# Associated File List$

#

# --------------------------------------------------------------------------

# Revision log:

# --------------------------------------------------------------------------

# Programmers Note:

# CNC 07/7/05 - Initial post update for Mastercam X

---

Thank you

 

 

John

[Post dept]

Defintely X2. Looks like we overlooked updating the executable version.

 

Brett

[bigjohn]

Thanks again Brett

 

 

John