hole axis errors revisit

[Chris Rizzo]

Happening on 2 computers. I clicked on this guy and performed the install.

 

http://www.3dgage.com/X2mr2/Verisurf_X2mr2_Hole_Axis.exe

 

now I get this on both computers.

 

 

[Jeremy Haage from MCAM NorthWest]

I haven't used this myself, but have you checked those paths to see if the files are there? It kind of sounds like it can't find those files it's referencing in the chooksverisurf folder.

[Chris Rizzo]

thanks Jeremy,

 

Yeah those paths are there. The first set of errors all look like they pertain to the same file. Lots of folks seem to use hole axis, not sure what I'm doing wrong on two computers.

 

clicking on the above link to verisurf, you really don't have any choices on the install to manually screw stuff up.

[Thad]

Chris,

 

If you open up the .ft file with a text editor, it should show the path of where the .dll is, or should be. Make sure that path is correct.

 

If you have it on other computers and it works fine, maybe you could just copy the files over.

 

Thad

[Roger Martin from CNC Software]

Chris,

 

Did you try running HoleAxis.dll ?

Settings - Run User App - ...

 

Since in HoleAxis.FT there is this function declaration->

 

FUNCTION CPP "m_main"

 

You should be able to.

 

I tried and it does not run, so...

I'd say you probably want to put a shout out to Ernie @ Verisurf.

[Chris Rizzo]

Nope, getting this:

 

[Verisurf - Ernie Husted]

For some reason the install was missing a needed dll.

 

 

Try downloading and installing it again, it should be fixed now.

 

Verisurf_X2mr2_Hole_Axis.exe

 

Ernie

[Chris Rizzo]

Fixed. Just reinstall with the above mentioned link and all is well....

 

Thanks Ernie!