haas tl2

[malibu]

hi all

I am using a haas post on a tool room 2 machine .

how can I change it to post k,i,d,f vs Q,P,E ?

 

 

thanks

[crazy^millman]

Depends on a lot more than that little bit of information. Are these in Canned cycles, Arc moves, Liner moves? If they are Canned cycles are they Turning, Drilling, Threading or Tapping? Got sample code of what you got and what you want?

 

HTH

[malibu]

hi Ron

this is what I am getting ( no good) canned mode od theading.

%

O0001

(PROGRAM NAME - T)

(DATE=DD-MM-YY - 14-04-08 TIME=HH:MM - 08:51)

(TOOL - 1 OFFSET - 1)

(OD THREAD RIGHT INSERT - NONE)

G0T0101

G97S300M03

G0G54X1.5Z.2274

G76P010029Q0.R0.

G76X.8466Z-1.P767Q273R0.E.125

M30

%

 

need to get something like this this

%

O00005

(OD THREAD)

T101

G54

G97 S500 M03

G00 X1.6

Z0.15

G04 P1.

M09

M24

G76 X1.48 Z-1. K0.03 I0. D0.015 F0.05

G00 X1.6 Z0.15

M09

M30

 

%

 

 

please advice

[crazy^millman]

If you feel comfortable changing posts hop over to the thread going on about the Threading BigJohn has up. It applies to your very problem. Though the information is for a Siemens control it does apply here. If you get stuck or not sure how I or maybe the guru Roger can get it worked out for you.

 

Linky to thread about thread cycle

 

HTH

[Don S at Barefoot CNC South]

Malibu

There is a switch in the post old style or new style G76 change that.