learning to edit post. don't want A-axis in programs

[Dustin S.]

Today Im working on editing a post to make it do what I want... I put in a call to my dealer but it takes some time for a reply.

 

I have a generic Haas VMC post but it has the A-axis enabled meaning it post A values to my program I don't need and the machine errors generaly I edit the program before it hits the floor but the less editing I do the quicker it can hit the floor. I did a search but couldn't find anything useful.

 

Basicly I don't use an A-axis how can I keep from posting it?

 

p.s. ill try not to flood the boards with post questions today would it be better to just keep posting under this same title?

[crazy^millman]

Go to the machine def and remove it from there should take care of it for you.

 

HTH

[M_CODE1]

I had to do that also, I know I turned the A Axis off in the Machine Difination Manager. But I cant remember exactly how I did it.

[Dustin S.]

lol incase it wasn't obviouse I can program but thats about it

 

I turned it off in the machine def. works great !!

 

Thanks again