Post Processor Q

[c-hook]

Hey all-

 

We've been using X2 for about six months now, we have 3 seats of X2 upgraded from V9, and as we adapt to it, I spent the better part of an evening at work tweaking the MPFAN generic post to work just the way I (and most others around here)like it, and I achieved this, finally (woohoo). Anyway, I wanted to be able to use this same post on our other computers without having to spend many more frustrating hours trying to figure it all out again. On V9 is was easy enough to simply copy the post over to the other seats, but X2 seems to be a bit more involved than that. Can someone please give me a little guidance in doing this.

 

Thanks.

[gcode]

Put the post, machine def and control def on your network.. Then all users are using the exact same post

[c-hook]

Good idea, only thing is, only two of our computers are networked, and of course the one that is not, is the one I set up the post on. : (

[M_CODE1]

The .mmd and .control files are in c:mcamx2-mr2cnc_machines directory

 

The .pst files are in the c:mcamx2-mr2millposts directory.

 

Copy them to an external device and move then to the other computers

[c-hook]

Thanks, I will try that.

 

Cheers