Manual Entry Code

[spade117]

When the code is used at the end of a tool, is there a way in the post to correct this:

 

 

code:

---

G91G28Z0.M106

M01

()

( 6MM CARB EM TOOL - 2 DIA. - 6. )

()

M22( ROTATE TO G57 SIDE )

()

( MILL NOTCH G57 SIDE )

()

N122T2M6

N124G0G90G57X-9.52Y-4.S6500M3

N126G43H2Z11.25M8T3

---

to this:

 

code:

---

G91G28Z0.M106

()

M22( ROTATE TO G57 SIDE )

()

M01

()

( 6MM CARB EM TOOL - 2 DIA. - 6. )

( MILL NOTCH G57 SIDE )

()

N122T2M6

N124G0G90G57X-9.52Y-4.S6500M3

N126G43H2Z11.25M8T3

---

I want the

 

()

M22( ROTATE TO G57 SIDE )

()

 

at the end of the last tool, before the M01, and not in the description of the next tool.

[kinglouie V]

would you be interested in creating a misc canned text command and choosing "after"? will your post support canned text?

[BrianP.]

You need to edit the post itself. But yeah it is possible to reorder they way the post spits it out.

[spade117]

quote:

---

You need to edit the post itself.

---

That is why I'm asking...trying to figure where in the post to edit.