c-hook help please

[herricam]

now that I have updated to MCXMR2 my C-Hooks don't work, why is this? the message is Incompatible C-Hooks internal version number. Recompile and relink the C-Hook: C:MCAMXCHOOKSROLLDIE.dll

how do I recompile the C-Hooks?

Thanks

[Kannon]

check here..

[herricam]

Thanks for the info, unfortunatly I have tried this and it still doesn't work. The C-Hook works when I first use it but then if I want to go back into it to change some parameters it comes up with the warning. The C-Hook I'm using is RollDie.dll

[Pete Rimkus from CNC Software Inc.]

As I said in March...

 

"If you're getting a "incompatible internal version number" it sounds like it's trying to run an earlier version of that C-Hook.

Use Alt-C and browse to the X2 MR2 Chook subfolder to make sure you're running what you're supposed to be running."

 

If you're using a shortcut key or a toolbar, maybe you've mapped it to the older version. Is X2 MR2 installed in C:MCAMX?

[herricam]

Hi Pete, No I'm not using a shortcut key, I am using Alt-C and then I browes to X2 MR2, it lets me use the C-Hook and generate a toolpath but then if I want to go back in and change any parameters the warning comes up. By the way how do you put a C-Hook on the toolbar?