Post help

[90rsgnuguy42]

I'm editing the new generic fanuc 4 axis post to use with one of my machines and here we like to see the G43 line look like this:

G43H1D1Z2.T2M8

The T2 is the next tool. I have everything the way I want it except the dia. comp. I've put this

*tloffno right after the *tlngno but for some reason it won't force that dia comp number out in the code. I've also removed the D# call that usually follows the G41 from the toolpath.

Anyone?

[Tim Johnson]

Try *tloffno$ (add the $)

[90rsgnuguy42]

AHA! Thanks Tim...that's why I come here. That did it. So obvious and yet...