Bridgeport DX-32 Drill Peck Cycle

[Murray Mold]

My post puts out a z value on every line when drilling multiple holes and on the peck cycle it will peck on the first hole but when it reads the z value on the next line it will not peck for the rest of the holes. I have to delete z values and sometimes if I forget it can ruin a drillbit and sometimes a part.

This is what it outputs:

 

T4 M06 ; NONE

G00 X0. Y.7233 S1316 M3

Z.1 M08

N402 G83 X0. Y.7233 Z1.35 Z.1 Z.1 F4.2126

Y-.2867 Z1.35

X-.3684 Z1.35

X.3684 Z1.35

G80

M05

M09

M01

 

Can any of you ol post guru's help me?

Thanks

[Murray Mold]

BTW. I have asked my reseller several times

[robk]

Should be a parameter change for modal or non-modal state of Q command.

Our Matrix as well as our Fanuc controls it's Parameter F165 Bit4----0= Modal, 1= Non-Modal

[Murray Mold]

Thanks, I'll give it a look