change STWC

[ak762]

Hi everybody,

Did anybody trouble with change coordinate STCW with wire couture operations.

I created same contours for profile but in different position then I tried exchange STCW and I cannot got good results.

I try to put work coordinate from upper right corner of sections.

I still can not see ftp.I send it to cadcam for put to ftp

I use this file both for mill and wire. When I change tools origin in mill I have not any problems.

I convert it from dwg to mc8 and use mill8.1.1 and wire8.1.1

If I use save some and save only couture profiles I have not got good results yet.

I suppose that problem in database of file but don't know how to clean it

Now I solved it:

convert mc8 to dxf

then dxf to mc8 again

After that STCW change coordinate without problem.

If it bug then guys from CNC work for enhancement

If you can help I'll be appreciated.

BTW why WCS in MC9 don't work with wire

For example if I have solid model and need to do wire operation from other plane then top

I must to do some translation. But then I read post processor manual I see no restriction for wire in NCI G code 1014

Can I solve it with help tune post.

 

Thank you in advance

Alexander

[ak762]

**************************************************

I try to put work coordinate from upper right corner of sections

************************************************

Sorry for mistakes I use upper left corner of sections

[ak762]

Cadcam told about:

It is on the FTP under Wire.

Have a good weekend

 

Jay (cadcam)

-----------------------------------------------

Original name was R2464_W.mc8 or R2464_W.zip

I did not see from my place.

I sent same to CNC but all keep silence

Why?

[ProductDevelopmentGuy]

I have passed your questions and the .ZIP file to the Wire developers, and we should have an answer for you by the end of the day.

PDG