GD&TV9

[Canuk]

CAN THE VERISURF PROGRAM BE INSTALLED ON X2&3 IF SO HOW IS IT CALLED UP IN MX2.Thanks Canuk

[Ron Branch @ 5th Axis]

No it will not work for these Versions. Sorry.

[Tony35]

no need to yell! welcome to the forum

[Guest CNC Apps Guy 1]

Eh??????

[Ron Branch @ 5th Axis]

Here are the links for the ADD-ONS for Mastercam for those versions.

 

Verisurf Add-on X2MR2SP1

 

Verisurf Add-On X3

 

You can demo them complete for 30 Days. Take a look at the MBD. It can read all the MBD information in from a Catia Model if you have the Translators installed. You can use any of the MBD stuff for 30 days. Also the reverse stuff is great. When you verify an operation. Make an STL. Then in the Reverse you can make machinable surfaces from that STL to use for the next operation in Mastercam. IN Mastercam you can make that surface into a Sheet Solid and then use that for the Solid Layout for Set-up sheets/Os sheets or many other things.

 

HTH and have a good day.

[Canuk]

Thanks Guys

I'll try not to yell anymore.Cheers

[Ron Branch @ 5th Axis]

FYI for those that use STL's and load either of these Add-ons. To get Mastercam STL's you need to go to the Reverse tab. Right click on the Mesh, Export, and then Export Cad. This is make a machinable and use able Mastercam STL. Currently when this is loaded it becomes a Verisurf STL that is not seen by Mastercam.

 

HTH