Problem creating edge curves from solids X3

[VINK]

Hi All,

 

So I've finally moved into the X era from V9.

 

I have a solid/wireframe I've imported from SW. I deleted the original wire frame geometry so I can perform some edits to the solid and now I want to create edge curves again. When I go into create>curves>curves on all edges it prompts me to select a solid. The problem is that I cannot select the one solid I have on the screen! If I click enough times it does finally select the solid but I am no longer in the create curves command. What am I doing wrong?

 

I have X3 (12.0.4.20)

 

Thanks for any help

[gcode]

Once you've selected Create Curve All

look at the toolbar.. there is a little

blue cube with a green check in it.

Selected that.

Then chose the red cube for a whole solid

or the red face if you just want curves on one face

[VINK]

Thanks gcode. Worked right away!