help on v9.1

[mikechvz]

I finally was able to get onto the windows view of the ftp site and upload a file in the v9 folder called mike help. Im trying to surface the face thats angled inside with a .500 dia lollipop and a .375 shank without making a rapid or cutting vertical and taking a cut out of the surface. i just cant figure it out again even though i've done it before. Another thing, now that i got it on there i cant log back onto the ftp windows view, just the original. Any help is appreciated as always.

[Hardmill]

Check your gap settings

"Check trans/retract motion for gouge"

Should be checked and you can set an entry/exit arc/line.

 

 

PEACE

[mikechvz]

i've tried a few different surface toolpaths but cant get it right yet with those options you gave. how do i set entry/exit

[Hardmill]

Youll find those settings in finish coutour

toolpath. Damn V9, im pretty sure they were there.

 

 

PEACE

[Guest]

Check out MIKE HELP JMP.mc9 on the FTP

[mikechvz]

i really appreciate it, hadnt figured that way out yet. thanks guys