CHANGE M9 AND M5 TO M95 IN POST

[veritasproject]

I NEED TO REMOVE M9 AND CHAGE M5 TO M95 ANY HELP

[crazy^millman]

Sure what post are you using? What version are you using?

[veritasproject]

MPMASTER AND X3

[Colin Gilchrist]

M9 is a coolant command. It is turned on/off through your toolpath settings. If you have coolant turned on, you will get M8, when the toolpath ends, it automatically outputs M9...

 

Do a search for "M5" in the post. You will come across a section that string selection logic and you will see something like this:

 

code:

---

# --------------------------------------------------------------------------

# Generate string for spindle

sm04 M04 #Spindle reverse

sm05 M05 #Spindle off

sm03 M03 #Spindle forward

spindle #Target for string

 

fstrsel sm04 spdir2 spindle 3 -1

# --------------------------------------------------------------------------

---

You backed up your post right?

 

Change the "M05" to "M95" and you should be in business. Are these the only changes you need to make?

[veritasproject]

thank you that worked