OKUMA DATA OUTPUT HELP

[veritasproject]

i made a gauging programe for our okuma and it worked grate but when it outputs the resolts it only out puts the file as a.mdf

is there away to change this

here is my program

 

(1-2-3 BLOCK GAUGING)

(PART ZERO IS BACK LEFT CORNER)

(Z ZERO IS 1.00" ABOVE TOP OF PART)

IF[VATOL EQ 32] N11

N1 T32 M06 ( 1/2 CENTERDRILL)

N11 M01

(MAX - Z.1)

(MIN - Z-.125)

G15 H1

G00 G17 G90 X.5 Y-.5

G56 H32 Z.1

CALL OO10 PMOD=3 PEI=-1.0 PEE=.01 PUDT=-0.9 POVT=1.011 VNUM=1 PF1=F25. PF2=F10. PF3=F5.

G0Z0.1

X2.95

CALL OO10 PMOD=3 PEI=-1.0 PEE=.01 PUDT=-0.9 POVT=1.011 VNUM=1 PF1=F25. PF2=F10. PF3=F5.

G0Z0.1

Y-1.95

CALL OO10 PMOD=3 PEI=-1.0 PEE=.01 PUDT=-0.9 POVT=1.011 VNUM=1 PF1=F25. PF2=F10. PF3=F5.

G0Z0.1

X0.5

CALL OO10 PMOD=3 PEI=-1.0 PEE=.01 PUDT=-0.9 POVT=1.011 VNUM=1 PF1=F25. PF2=F10. PF3=F5.

G0Z0.1

X-0.150

Z-1.25

CALL OO10 PMOD=1 PEI=0

CALL OO10 PMOD=15 PAXI=1

G0Z0.1

X3.15

CALL OO10 PMOD=1 PEI=3.0

CALL OO10 PMOD=14 PAXI=1 PE=0.01 PXCI=1.5 PXCE=0.02 PXLI=3.0 PXLE=0.01

G0Z0.1

X1.50 Y0.15

Z-1.25

CALL OO10 PMOD=2 PEI=0

CALL OO10 PMOD=15 PAXI=2

G0Z0.1

X-2.15

CALL OO10 PMOD=2 PEI=2.0

CALL OO10 PMOD=14 PAXI=2 PE=0.01 PYCI=1.0 PYCE=0.02 PYLI=3.0 PYLE=0.01

G0 Z0.1

G30 P1

G90

VPRT=8

M30

[veritasproject]

sorry the vprt=8 is what outputs the a.mdf file

[Colin Gilchrist]

"is there a way to change this"

 

Yes.

 

The question is, what do you want it changed to? Do you want to change the "vprt=8" line, or something else?

 

You've posted up the current output, what do you want it changed to?

[veritasproject]

vprt=8 is what outputs the a.mdf file to my md1 folder

i want to change the a.mdf to like frist_part.mdf

see it is the name of the file that the vprt=8 puts out that i want to change

[Greg Williams]

You could try checking Parameter BIT 32 No 5. This will output the gauging results to a txt file in the MD1 directory. Also remove vprt=8