Post operators?

[CNC PRO]

Would someone mind giving me a list of operators that are usable in a .pst file?

All I have seen so far in my posts are the "if, else, &/and" opeators...is this what pst. is limited too??

 

Thank you

[Guest]

| = or

(not) = a variable not set

while

[connormac]

You can have If/Then statements.

[CNC PRO]

Thanks guys.

 

[iowajim62]

Here's a link to a previous thread. Luc at Simtech has the Post Guide available for download.

http://www.emastercam.com/ubb/ultimatebb.p...8155;p=1#000015

[Rob @ Target Machine]

The V9 Post Reference Guide is priceless, but don't forget the Post Parameter Ref...Located in the mcamx/documentation folder. Some useful info in there too.

 

Especially the new rules for X posts.

[connormac]

I have a version 5 book that is real helpful also

[CNC PRO]

Thank you Jimmy for that link, I downloaded the 04 version...a lot to read thru.

 

quote:

---

but don't forget the Post Parameter Ref

---

I have looked thru that, and figure that learning from the post referance guide first would be beneficiary, but the Post Parameter Ref is definetly a wealth of info for when one is up and running with editing posts (or maybe even writing )

 

quote:

---

I have a version 5 book that is real helpful also

---

When reading extensive documantation I prefer paper over software (easier on the eyes)...any idea where I would be able to order a book like that, or a new'er version even??

 

Thank you all for your replies.

[rdshear]

quote:

---

When reading extensive documantation I prefer paper over software (easier on the eyes)...

---

Me too.. I asked that same question a while back and was pretty much told they don't publish it except in the PDF format.

 

I think it's easier and less expensive to keep up to date and distribute. I agree completely though I like paper.

 

What I ended up doing was printing off the sections I found myself referencing often. That helped a lot. Once you get into it you'll find you reference less and less.

 

I had heard rumor at that time that they were working on a current post reference guide for X... I'd love to hear the status of that.

 

 

Rick

[Alvaro Gil - Cimquest-inc.com]

Its way easier to search in PDF format.

 

I would however love to get one of those eBook readers and throw it on that!

[Jack Neelands™]

Im going to be reading for weeks

 

Thanks guys for that priceless tidbit

[CNCGUY]

Hey guys,

 

I looked thru the reference guide but didnt see what I need. How do we check if two variables are not equal?

 

Thank you

[CNCGUY]

Thanks Colin.

 

I was thinking that would be greater than or less than, but if its not greater and its not less, it's not equal.