Verify Shuts Down MX2

[EazyE]

Three times in a row ... Run verify save file and during the save MX just closes no report or anything. Almost like it was never open.. This is a first has anyone had this happen before.

[Guest]

Erik,

 

If I am understanding you, you're saving your verify as an stl file?

 

If you have a LARGE file that is being saved as an stl, you might want to try using X3 however if it gets up to 100 megs or so, you're going to have trouble. You might try turning down the resolution on the stl and trying it again.

[EazyE]

Thanks J... I might be stopping in to see you soon. I have some things I want talk to you about....

[Guest]

No problem Erik, if you're looking to catch me specifically, give me a call to make sure I am in the office that day, if you just need a hand, Mike, Steve or myself should be able to give you hand.

[crazy^millman]

Yeah Erik I had the same thing happen to me here. I am stuck in the X2MR2SP1 land myself. I would really like to move up, but I am not putting my job on the line anymore for maintenance. I use X3 only for Verify and Verisurf that is it.

[EazyE]

It will be you specifically John. I will call sometime this week... (If I ever get a free moment) .. .

 

 

I hear you Crazy- I just cant be spending time with something new rite now. If I fall behind on something its my back side on the line....