mazatrol to gcode

[veritasproject]

dose any one out there know where i can find out how to change mazatrol code to gcode

i have a nc file in mazatrol that was sent to me from our china plant and i can make heads or tails of it . any help would be great

[pip]

You will need someone with camware or mazacam.

Can you read the file at all.

Is it a binary format?

[ReDEyZZ]

quote:

---

dose any one out there know where i can find out how to change mazatrol code to gcode

---

Mazacam or griffo brothers should do it...but I prefer to re-program it myself, the conversions are glitchy sometimes. imo

[veritasproject]

this is what it looks like and what i need is g code

 

 

WNo.200902 ( PK009-OP2(2) )

UNo.MAT OD-MAX ID-MIN LENGTH RPM FIN-X FIN-Z WORK FACE

0ぃ葵 18. 0. 80. 1500 0.08 0.04 3.

 

UNo.UNIT # 1 # 2 # 3 # 4 # 5 # 6 # 7 # 8 # 9 #10 #11 #12

1 M 8

 

UNo.UNIT RV FV R-FEED R-DEP. R-TOOL F-TOOL

2EDG FCE 79 99 0.06 0.3 11

SEQ SPT-X SPT-Z FPT-X FPT-Z RGH

1 12. 0.3 0. 0.

 

UNo.UNIT # DIA DEP-1 DEP-2 DEP-3 C-SP FEED TOOL

3DRL FCE 1 2.5 2.5 1.5 1. 11 0.03 1

SEQ SPT-Z FPT-Z

1 0. 2.

 

UNo.UNIT # CPT-X CPT-Z RV FV R-FEED R-DEP. R-TOOL F-TOOL

4BAR OUT 0 12. 0. 88 90 0.08 0.3 11

SEQ SHP S-CNR SPT-X SPT-Z FPT-X FPT-Z F-CNR/$ RADIUS/th. RGH

1ar1 7.925 0. 9.356 0.413 0.826 0.05

2CTR @ 7.925 0.826 @ @ @ R U

3TPR 9.356 0.413 9o833 0.826 R 0.127 30. 0.05

4TPR 10.82 0.826 11.405 1.119 45. 0.03

 

UNo.UNIT # CPT-X CPT-Z RV FV R-FEED R-DEP. R-TOOL F-TOOL

5BAR OUT 0 12. 0. 88 90 0.12 0.3 2

SEQ SHP S-CNR SPT-X SPT-Z FPT-X FPT-Z F-CNR/$ RADIUS/th. RGH

1ar1 7.925 0. 9.356 0.413 0.826 0.05

2CTR @ 7.925 0.826 @ @ @ R U

3TPR 9.356 0.413 9o833 0.826 R 0.127 30. 0.05

4TPR 10.82 0.826 11.306 1.069 45. 0.03

5TPR 11.306 1.069 11.573 1.3 30. 0.03

 

UNo.UNIT # DIA DEP-1 DEP-2 DEP-3 C-SP FEED TOOL

6DRL FCE 1 4.3 2. 1.5 1. 11 0.05 12

SEQ SPT-Z FPT-Z

1 0. 42.

 

UNo.UNIT CHANGE-PT GEAR TOOL

7MNP 1 1 12

SEQ G DATA-1 DATA-2 DATA-3 RADIUS/VARIABLE RPM FEED M OFS

1 0

 

UNo.UNIT # CPT-X CPT-Z RV FV R-FEED R-DEP. R-TOOL F-TOOL

8BAR IN 0 4.3 0. 80 85 0.06 0.2 6 6

SEQ SHP S-CNR SPT-X SPT-Z FPT-X FPT-Z F-CNR/$ RADIUS/th. RGH

1ar1 7.925 0. 6.757 0.242 0.826 0.05

2CTR @ 7.925 0.826 @ @ @ R D

3TPR 6.757 0.242 4.3 1.47 45. 0.05

 

UNo.UNIT # DIA DEP-1 DEP-2 DEP-3 C-SP FEED TOOL

+ 9DRL FCE 4 4.5 3. 3. 3. 11 0.04 10

SEQ SPT-Z FPT-Z

1 0. 79.

 

UNo.UNIT CHANGE-PT GEAR TOOL

10MNP 1 1 10

SEQ G DATA-1 DATA-2 DATA-3 RADIUS/VARIABLE RPM FEED M OFS

1 0

 

UNo.UNIT # DIA DEP-1 DEP-2 DEP-3 C-SP FEED TOOL

+11DRL FCE 3 4.5 @ @ @ 12 0.03 8

SEQ SPT-Z FPT-Z

1 0. 79.

 

UNo.UNIT CHANGE-PT GEAR TOOL

12MNP 1 1 8

SEQ G DATA-1 DATA-2 DATA-3 RADIUS/VARIABLE RPM FEED M OFS

1 0

 

UNo.UNIT # CPT-X CPT-Z RV FV R-FEED R-DEP. R-TOOL F-TOOL

13BAR OUT 0 11.5 0. 88 36 0.03 0.2 7

SEQ SHP S-CNR SPT-X SPT-Z FPT-X FPT-Z F-CNR/$ RADIUS/th. RGH

1LIN @ @ 7. 0. @ 0.03

2ar1 7.925 0. 9.356 0.413 0.826 0.03

3CTR @ 7.925 0.826 @ @ @

4TPR 9.356 0.413 9o833 0.826 30. 0.03

5LIN @ @ 11.5 0.826 @ 0.03

 

UNo.UNIT # CPT-X CPT-Z RV FV R-FEED R-DEP. R-TOOL F-TOOL

+14BAR OUT 0 11.5 0. 88 36 0.03 0.2 7 A

SEQ SHP S-CNR SPT-X SPT-Z FPT-X FPT-Z F-CNR/$ RADIUS/th. RGH

1LIN @ @ 7. 0. @ 0.03

2ar1 7.925 0. 9.093 0.242 0.826 0.03

3CTR @ 7.925 0.826 @ @ @

4TPR 9.093 0.242 11.349 1.37 45. 0.03

5TPR 11.349 1.37 11.5 1.5 0.03

 

UNo.UNIT COUNTER RETURN WK.No. CONT. NUM. SHIFT

15END 0 1 200901 0

[ReDEyZZ]

quote:

---

this is what it looks like and what i need is g code

---

Those are standard mazatrol units, you will need software such as mazacam or griffo bros software to convert to g-code. It is the only way that I know of to do that conversion, even then its glichy as I said earlier. It is a short program, I would re-draw it in mastercam and post it out.

[Dave Ball]

Jarrett is correct. Only mazacam or griffo brothers can convert it. I have mazacam and have done a few conversions for friends and it is glitchy, definatly not something you just convert and run. going over it really well to ensure everything is fine is mandatory.

[mcpgmr]

We have mazacam here too. Haven't converted a file for real use yet but if you want, I'll give it a try for you. Put the file up on the FTP and I'll take a crack at it.

[pip]

Camware will convert that file to ISO

[coolsas]

hi there,

what you've posted above looks like mazatrol units, but this is no binary code you can send to the turning machine or you can convert in iso g-code or mazatrol g3-code. I think this is only a printed text file (from cnc or camware), you have to reprogram it directly on the cnc or in a mazatrol programming software.

 

bye

[pip]

If this file is a *.G3D file, then it can be imported back in to camware, and then exported as ISO.

[TomR]

If you have a mazak MP+ or later controller, ask for the file in G3D format and then import directly into your Mazatrol controller.

If you don't have a Mazak, ask that they export the file in ISO and you can read as G-Code. Any

canned cycles within the file will be outputed in usable long format.

Tom R